Q: On a 2004 Ford Escape are lateral arms the control arms in the rear?

asked by on

On a 2004 Ford Escape are lateral arms the control arms in the rear?
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. On a 2004 Ford Escape are lateral arms the control arms in the rear?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2010 Ford Fusion Hybrid won’t start. Seems normal but when I fully turn my key there’s a car with lock that blinks

The warning light means that the engine immobilizer system has detected a fault and/or is not recognizing the key. You can attempt to reset the whole system by removing the key from the car. Then, disconnect the negative battery cable...

Q: Car hesitates to start

Vibration may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve may cause the engine idle to drop below the normal idling RPM...

Q: I just had to get my alternator replaced for the second time within three monthly oil gasket had to be replaced it was leaking.

To properly clean your engine, I suggest using a substance called Sea Foam. Put one bottle of the fluid in your engine and run the engine for about 30 minutes at 2,000 rpm's. Then either take the car to a...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...