Skip the auto shop - Our mechanics make house calls

Q: oil pump swap

asked by on

I was wondering if a toyota mr2 rev 3 oil pump will fit and work on a rev 1 both non turbo thanks

My car has 108000 miles.
My car has a manual transmission.

A: Hello. If the pump are from a 2.2 5S-FE or ...

Hello. If the pump are from a 2.2 5S-FE or 2.0 3S-GE engine, then yes, they should be interchangeable as long as the correct oil pans are used. If the engines are Turbo, then the oil pumps are completely different.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Steering Angle Sensor

Your vehicle has an electronic vehicle stability control (VSC) system. The VSC system relies on data from the steering angle sensor to keep the vehicle on the intended path during an emergency maneuver. Inasmuch as this is a valuable vehicle...

Q: Seeping oil pump

This is a common issue on your type of vehicle. This is a pretty good size job. All timing components and the oil pan usually need to be removed for this repair. This is something that I definitely would suggest...

Q: Engine quits at any speed even when idling - 1990 Mercedes-Benz 300 CE

Hey there, thanks for writing in. You will need to verify to see if the problem is in the ignition module not giving spark when the engine dies. If no spark is given, then the most common cause of the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.