Q: oil light and batter light comes on and car shuts off

Hello. It is possible that the reverse light wiring is faulty, or that the light bulb sockets are damaged in some way. However, it is more likely that there is an issue with the neutral safety switch (https://www.yourmechanic/com/services/neutral-safety-switch-replacement), and it...

Anything is possible with enough engineering. The changes you are looking at would take major structural changes and would definitely not be an easy job. You could possibly consult a manufacturing engineer to get more details on how this could...

It sounds like the Idle Air Control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is gunked up. It may be possible to clean it, or it might have to be replaced. A YourMechanic professional can help to diagnose the stalling issue (https://www.yourmechanic.com/services/car-is-stalling-inspection) and replace the...

This may be a sign of a faulty blower motor. As you know, these have electric motors in them that wear out over time and will begin to make squeaking or grinding noises as the bearings begin to wear out....

Hi There, What you are describing sounds like a dirty or faulty mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) monitors air intake as it is mixed with fuel prior to being injected into the motor. This sensor...

If the battery passes a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection) and charging system output has been measured and is within specifications, the only reason a battery will discharge is if the car sits for a long period of time (batteries will self-discharge...

Hi there. In most cases, an engine misfire is caused by either an ignition or fuel system related component. Specifically, either a fuel injector is not firing correctly or the spark plug or ignition coil is not firing correctly. The...

Has anyone suggested that the car could be misfiring? If it is the check engine light should be on. Try turning the key on without starting the engine and see if the Check engine light comes on. This is a...

Hi Steven. Thanks for contacting us today. Limp mode is generally triggered due to a fault within the driveline, such as a differential or transmission issue. The best way to get an indication as to what is causing it is...