Skip the auto shop - Our mechanics make house calls

Q: Noise when a 2015 vehicle is started

asked by on

The car sometimes when I turn it on, just go "chi, chi, chi." I've changed the spark plugs. It's a 2015, 6-cylinder.

A: It's a 2015, so it should still be unde...

It's a 2015, so it should still be under warranty. Take it back to the dealer and let them fix it for free. If it's cranking and not starting, and it's a 2015, then that's not your problem. Let the dealer fix it for free under warranty. If for some reason they won't help you, YourMechanic offers mobile technicians that will be able to diagnose and repair your starting issue.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Master cylinder going bad

The master cylinder may be going bad if you notice the pedal going down to the floor with no signs of any brake fluid leakage, or if the master cylinder is leaking fluid from the back of it into the...

Q: What else can be done

You should have an engine compression test done to see if one or more cylinders are low on compression. If the spark plug insert is not installed correctly or leaking compression it will be identified in this test. If the...

Q: fixing flexplate

Hi there, thanks for writing in about your 2002 Mitsubishi Lancer. The big flex plate goes first, then the small plate and bolts to hold it all on. The small plate is made to support the large plate from cracking...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...