Skip the auto shop - Our mechanics make house calls

Q: Need transmission replaced.

asked by on

I need my transmission replaced. The transmission is slipping and jerky.

Sounds like you may have some transmission problems, I would take it to a transmission specialist to determine what the problem is.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I'm getting two ignition coils replaced on my 2007 Honda Fit and it will cost me 280 without labor. This sounds weird

Hi there. If your engine is stalling out on you and the shop has said that the issue is your ignition coils, try checking the coils and see if there is a spark coming out of them by removing the...

Q: Transmission is hard to change over after overheating due to a ruptured radiator hose.

There are 2 unrelated issues going on here. The poor idling may well reflect a blown headgasket from the overheating event you mention. This would show up as rough idling and spark plug firing issues/codes. The harsh shifting can be...

Q: Is my alternator bad or my cables?

Hello. If the vehicle is only working when the charger is installed then there is high resistance in the vehicles electrical system. Most of the time it is caused by a bad positive battery cable. I usually do a voltage...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...