Q: Need to fix windshield wipers.

asked by on

Windshield wipers quit working.

A: Hi, you may have a a bad windshield wiper m...

Hi, you may have a a bad windshield wiper motor or mechanism. I would suggest a technician, such as one from YourMechanic, to come out and check it out and repair your windshield problem.

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: car starst fine but as soon as you put in gear it shuts off what would cause this problem

First, try to keep the engine running by holding the idle up a little with the accelerator to see if it can stay running and the problem is not inside the transmission. If you can keep it running this way,...

Q: Brake lights don't always work

It sounds like you are having an issue with your brake light on/off switch. The switch is located under the dash high on the brake pedal bar. Sometimes these switches just get pushed out of place and need to be...

Q: Sputtering then stalls at idle rpm

Hello. If your vehicle is stalling after three minutes, then the computer should have stored a code for the issue unless the computer or power to the computer is at fault. Have the computer scanned and any codes diagnosed to...

Related articles

How to Renew Your Car Registration in Oklahoma(DELETED)
Having your car registered with the Oklahoma Tax Commission is an important part of driving legally in this state. You will need to do this within 30 days of moving to Oklahoma...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...