Q: need to change front wheel upper arm bussing/ what tolls do i need to use

Your map lights provide additional illumination for the driver and front passenger. They turn on when your interior lights are set to on or the door setting, but they can also be operated independently. To use your map light, just...

Your car is equipped with folding rear seats. This provides a great deal more room for carrying larger items or lots of cargo, at the cost of eliminating seating in the back. Here’s what you need to do: Make sure...

Seat belts are incredibly important safety features that can save your life, or greatly reduce injury in an accident. It’s vital that you wear your seat belt correctly. Here are some things that you should always check after buckling your...

A shaking steering wheel at low speeds can be caused by tires that are out-of-round or badly worn due to some failed suspension component. Have a technician, such as our experts here at YourMechanic, check for looseness in the front...

Hey there, thanks for writing in about your 2011 Infiniti G25. Diesel fuel can damage the injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), lines (https://www.yourmechanic.com/services/fuel-hose-replacement), and filters (https://www.yourmechanic.com/services/fuel-filter-replacement) of a gasoline fuel system. Since a gasoline engine can't correctly combust diesel fuel, engine damage can...

Your computer is located inside the car and would need to be tested by scanning the computer to see if it is storing fault codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) for an internal problem or an indication to some engine sensors that may have...

The BCM or body control module will be located under the dashboard on the driver side towards the center of the vehicle. Look to the right of the steering column towards the firewall. It will be a small black rectangle....

On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle. Replacing both axles...

Either the engine temperature at the instant the warning light illuminates is indeed out of range (high) or the temperature reporting system (the fail safe function) is malfunctioning. It is is possible to use a real time automotive scanner to...