The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
This issue may be related to a malfunctioning crankshaft or camshaft position sensor. These sensors monitor the position of both shafts and send feedback to the PCM (engine computer) which then sends signals to multiple other things such as fuel...
The driver’s seat belt reminder Warning Light is located on the instrument panel, and is accompanied by a buzzer sounding. This light illuminates when the driver has not securely latched their seat belt. When the belt is buckled, the light...
These cars are known for having faulty crankshaft position sensors. This sensor can cause an extended cranking condition, which eventually turns into a vehicle that won't start. Checking for diagnostic codes stored in your power train control module (PCM) would...
It is a little suspicious the vehicle wouldn't start after the service. There aren't many sensors in the location of the top passenger motor mount, but the camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). If this sensor is damaged, the vehicle may not...
If the vehicle transmission has entered limp mode and the engine is really misfiring, these faults have to be diagnosed separately. The engine misfiring should be dealt with first. Typically, the engine is scoped to look at secondary firing patterns...
Hi there. The oil pan, oil filter, or the rear main seal (rear crankshaft seal) could be leaking. Check the oil filter and make sure that it is on tight. Then take a socket and wrench and check all of...
It appears that your vehicle uses two separate sensors. One would be for the temperature gauge on the dash, while the other one is used for the signal to the control module. The sensor for the control module should be...
Hello. If you have no pressure to the rear calipers at all and if the master cylinder is new then you may have forces some debris into the ABS unit when you compressed the pistons in the rear calipers. In...
The noise may be due to interaction between the pads and the rotor "design" that sets up a harmonic at particular speeds. OEM pads and rotors are already designed, tested and approved as matched materials in order to avoid the...
If If you deliver pizzas, you want to be sure that your car is reliable and won’t break down. After all, you have hungry customers waiting, and you don’t want the pizza to get cold. You want low gas mileage,...
Plasti Plasti Dip is a relatively new product that can be used to temporarily change the color of your car. It is basically a liquid form of the material used to vinyl-wrap cars, and it can be sprayed on like...
Caring Caring for the paint job on your car is one of the best ways to keep your car looking great all year round. Regular washing and cleaning, followed by drying, polishing (https://www.yourmechanic.com/article/how-to-polish-a-car-by-olivia-marsh), and waxing, adds a protective coating over...