Q: My wiper is electrically stuck on the lowest setting.

asked by on

I've read that it's probably the signal lever itself but I was wanting to know if it could possibly be something else because I'd really like to fix this myself.

My car has 71558 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My wiper is electrically stuck on the lowest setting.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Oil leaking under car

Hello, if the oil leak is big enough that you see it dripping on the ground, it should be inspected sooner than later to avoid damage. There are three possible sources of an oil leak, the engine, the transmission, and...

Q: Q: WONT START

There are two common items that can cause an intermittent no start with this car. You already replaced the crank sensor, which is one of them. The other can be the key, and/or the Electronic Ignition Switch (EIS). If...

Q: When gas leval reaches half a tank my car acts as if it has no gas when i get to a quarter it wont run

The fuel pump in the fuel tank is most likely leaking fuel where it hooks to the fuel pump housing. I recommend replacing the fuel pump in the fuel tank.

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...