Q: My esc light came on not long ago and I can't turn it off... why is this?

The ABS Warning Light is located on the instrument panel. When there is a problem with the ABS (anti-lock brake system), or the brake assist system, the light will illuminate. As brakes are the most important safety feature on your...

Hello. If this occurred right after a brake line was fixed then there may be low brake fluid in the vehicle or there may be a pressure switch failure. I would double check the brake fluid just to see if...

The mechanic that checked your vehicle is giving you a possible fix by cleaning the throttle body (https://www.yourmechanic.com/services/clean-throttle-body) of built up carbon. This may help with the idle and P0505 code (https://www.yourmechanic.com/article/p0505-obd-ii-trouble-code-idle-control-system-malfunction-by-jay-safford), and for passing the emissions test (https://www.yourmechanic.com/article/how-to-pass-an-emissions-test-by-mark-vallet). The...

There is a recall (https://www.yourmechanic.com/article/how-to-check-if-your-car-has-recalls), 05v270000, for electrical system wiring dated 2005-06-07. This is a Ford recall number that pertains to this exact problem you are having and the cause of the issue may be the fuel injection wire harness...

Hello. No power to the fuel injectors can be caused by a few things. If the relays, fuses, and computer all check out then I would move on to looking at the engine management and fuel system. It may be...

Hi, thanks for writing in. I'd be happy to offer my insight. You engine may have carbon build up on the valves and clogged injectors. I recommend having the combustion chambers and injectors cleaned. Once this is done then I...

Changing an engine is a big job that involves many little details, and sometimes all of the details don't get completely ironed out. It could be that one or more of the exhaust heat shields was not put back in...

Hello, thank you for writing in. We need to determine if the key is getting stuck in the ignition cylinder, or if the shifter is not registering as being in park. First, make sure nothing is stuck in the way...

It is possible that the low voltage from the battery may be altering the reading from the oil pressure sensor. I would suggest manually checking the oil via the dipstick and using that as a reading as to the oil...