Q: my dash lights and turns signals are not working
2001 town and country dash not working or turn signals
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Looking to upgrade header.
Hello. Typically having water in the headers is not a good sign. If the vehicle is not driven much then condensation can build up in them from short periods of running the engine. If the vehicle is driven often and...
Wheel barrels replaced multiple times
You can bet that's a no-no. Wheel bearings are both hidden by the big log and they have to be put down with a torque wrench for the perfect setting, because, if they are too loose they will wobble or...
the car wont pass emmissions the code po420 comes up
Fault code P0420 indicates the catalytic converter is operating below proper efficiency. There are two oxygen (O2) sensors in the exhaust system. One just before and one just after the catalytic converter. The ecu reads the first O2 sensor to...
Car will not start intermittently while in PARK but always starts on NEUTRAL.
Hi there, thank you for writing in and providing a detailed description. I'd be happy to give my insight on what to do next. I would make the same conclusion about the neutral safety switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-neutral-safety-switch). I think Pep Boys...
It started shaking then stalled out and wouldn't start back up
This may be related to many different possibilities, some of which may be related to a lack of spark and some of which may be related to a fuel delivery problem or a combination of both. For example, if the...
What could be the cause of code P0171
PO171 occurs when the fuel mixture has gotten so lean that it is out of the range that the ECU can compensate. It can be accompanied by poor idle quality, weak performance and even stalling. While Oxygen sensor number 1...
Transmission runs good ,the select shift won't shift
Hello. The warning light you are referring to is not one we know by that name. Check your owner's manual for more information on what the warning lights mean and how critical they are to service. If the vehicle has...
2 bolts off but starter won't come off!
First you need to remove the three bolts holding in the starter and then on back side remove support bracket off of back of starter. the starter will ten be able to be removed.
Car is jerking and then correcting itself while driving. Especially when getting off gas pedal and then when pressing again. Not
Hi there. In general, when this situation occurs, it's due to loose or damaged suspension components as you've described above and indicated were recently replaced. It's quite possible that one of the components has come loose and is the source...
Related articles
A Buyer’s Guide to the 2012 Chrysler Town & Country
While While the Chrysler Town & Country has been in production for over half a century, the 2012 Chrysler Town & Country is anything but old-fashioned. The model got a huge overhaul in 2011 and saw a few new upgrades...
The Best Used Cars to Buy If You Get Motion Sickness
For For people that suffer from motion sickness, even on the shortest car trip, riding in a vehicle can prove to be unbearable. What’s great is that there are a number of cars on the market that can help to...
How to Customize a Chrysler 300
The The Chrysler 300 (https://www.yourmechanic.com/article/a-buyer-s-guide-to-the-2012-chrysler-300) is an extremely popular model of sedan with sleek styling reminiscent of more expensive brands like the Bentley at a far more affordable price. It’s a great long-distance cruiser with get-up-and-go, which inspires great loyalty...
Browse other content
Estimates
Services
Cities