Q: My car wont start cranks but wont fire

asked by on

So i changed fuel pump and filter and changed crank shaft sensor it has spark and battery is fine but it wont start and used some starting fluid no fire still could it be compression

My car has 170000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My car wont start cranks but wont fire

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Trouble starting car when cold

The starting issues scream timing. The typical causes that set these codes are the cam and crank position sensors. The only option you have not tried to my knowledge is the camshaft position sensor. I would start there. With all...

Q: Upon starting, the vehicle has a dry start for about 5 seconds unless it sits overnight.

Hi there. Check the oil pressure sensor and see if its working or sticking. When the oil pressure sensor is sticking or not working correctly, the computer will cut the ignition and fuel off until oil pressure is met and...

Q: Timing belt replacement and car still don't start

From what you've described you'll need to remove the spark plugs and have a compression test done. It sounds like you may have bent the valves in the motor when the timing belt broke. I'd suggest having this looked...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.