Q: Fuel pressure

The cooling system would need to be completely checked out to see if the cooling fan circuit is working correct. If the fans are not coming on it would allow the engine to overheat. The thermostat would cause the engine...

You may find trying to overhaul the motor and swapping over all the parts to the new motor may be the best bet to get the vehicle to run without problems. You do not know what you are getting from...

Check with your Chevrolet dealer regarding a recall (https://www.yourmechanic.com/article/what-to-do-if-your-car-is-recalled-by-jason-unrau) (Chevy #15386 (http://gm.oemdtc.com/3861/15386-inner-tie-rod-not-torqued-to-specification-2014-2015-chevrolet-cruze-2014-chevrolet-volt/5)) regarding a loose tie rod end on some models of Volt for your model year. This would definitely cause a clunk under the conditions you describe, and is...

Hello - this is a known issue, and BMW has a technical service bulletin out to address this (#385317). A software upgrade to the engine management computer is the repair for this. You should check with your BMW dealer's service...

Hello - Probably not. The model was redesigned for 1993, and it's likely the steering column changed at that point. I would check with local recycle companies, and Ford Ranger internet forums for advice from others who may have faced...

Hi Heidi. In order to provide you with an accurate estimate for this service (https://www.yourmechanic.com/article/how-to-replace-an-ignition-lock-cylinder-by-timothy-charlet), we need to get some additional information from you. However, if you're having ignition issues, it's probably a good idea to first have one of...

Hi There, While it may be possible that the motor may have jumped time, this is not likely. It may be much more likely that your issue does in fact relate to a faulty camshaft position sensor as this is...

There are software updates, and at least one specific Technical Service Bulletin, pertaining to the vehicle safety systems you note. All updates (re-programming) should be installed before, or during, any diagnostics because such may have an impact. There may also...

Hello there. To request an estimate to have your water pump replaced, please click this link to the service page (https://www.yourmechanic.com/services/water-pump-replacement). Once you get to the page, click the blue Get a Quote button to request an estimate.