Q: My car is rattling am I still able to drive it

You have already performed most of the repairs associated with this problem. This vehicle uses throttle body injection (TBI) which is a fairly simple system. In your situation, the pressure line to the throttle body assembly may be obstructed or...

Hello. The high pressure power steering hose is the most common hose to leak on your vehicle. I have also seen the return line leak at the power steering reservoir from a loose clamp. If the leak cannot be easily...

Hello, thanks for writing in. The connectors you are referring to are commonly called the ignition coil pigtails, or simply ignition coil connectors. In some cases the damaged connectors will still plug in and allow the coil to function correctly....

One common cause of such noise is a failed outer CV joint on the CV axle. If you peer behind each front wheel, underneath the vehicle, and use a very bright focused light to shine on the rubber boots that...

Hi there. The code P0500 (https://www.yourmechanic.com/article/p0500-obd-ii-trouble-code-vehicle-speed-sensor-malfunction-by-spencer-clayton) is in reference with the vehicle speed sensor. The possible causes that contribute for this code to appear are: The vehicle speed sensor (VSS) is not reading properly There is a broken or frayed...

Hi there. It more than likely that you are experiencing an issue with the alternator or the main relay as opposed to the battery itself. Once your car starts, power to all components and accessories is provided by the alternator;...

Hi there - you are correct that there are 2 catalytic converters (https://www.yourmechanic.com/services/catalytic-converter-replacement) on your vehicle; one (sometimes called a pre-catalyst) that is part of the exhaust manifold, and a 2nd converter further "downstream" in the exhuast system. It is...

If the clutch pedal is not moving and the clutch is partially applied, then the clutch release bearing may be damaged and the fork is jammed into the clutch forcing it to slip (https://www.yourmechanic.com/services/gears-slipping-when-accelerating-inspection). For the no start condition on...

Prior to condemning the ABS module, there are quite a few tests that must be performed to rule out more common causes. In particular, you always want to rule out what is indeed the most common cause of an ABS...