Skip the auto shop - Our mechanics make house calls

Q: My brakes make a strong grinding sound when I start my car

asked by on

My car is Honda Jazz/Fit (1.4CC ivtec? Its a push start button. Whenever i start my car...it make the grinding sound. 1st i will step on the break then push the start button...then i can hear the grinding sound. It make the grinding sound rarely. What is that? Why does it make grinding sound?

My car has 29766 miles.
My car has an automatic transmission.

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car starts in and out slow cranking at times power is on

Hello. Slow cranking can be caused by a few different things. If you have ruled out the starter and battery then the next things to look at would be the battery cables and the ignition switch. If the battery cables...

Q: Garages

Hi there, thanks for writing in. I would not recommend working on the car in the garage with the door shut if you plan on starting it at any point. As you may know, carbon dioxide is an extremely toxic...

Q: When I turn my AC, my car shuts down.

Hi Erick. It sounds like the idle is not being adjusted/compensated for the additional load of the ac compressor. Additional loads on the engine require the idle to increase to make sure the engine does not stall under the load....

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...