Skip the auto shop - Our mechanics make house calls

Q: Multiple system failures

asked by on

I am having problems with the suspension, steering, fuel, exhaust, and brake systems.

A: I recommend having a mechanic, such as one ...

I recommend having a mechanic, such as one from YourMechanic, run a full diagnostic on your brakes, steering and suspension systems, in order to identify and quote the repairs needed.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: cranks but wont start it shut off

The most common cause of the 4.0 engine not starting is the crankshaft position sensor going bad. You can scan the engine and see if you are getting an RPM signal. If you are not getting signal, then the sensor...

Q: Steering wheel squeaks, horn won't work & airbag light on

Hi there, thanks for writing in about your 2001 Chrysler LHS. The clock spring in the steering column is used to pass the wires from every steering wheel component and air bag on the steering wheel. The clock spring is...

Q: I get 5 miles per gallon truck stalls at low rpms

This may be a sign of a failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine. This valve is controlled by the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...