Q: Muffler loose
The muffler on my car is loose and hanging low.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
No working gas pedal, hard to shift
Getting a transmission repair is possible depending on the damage that has been done. The repair could involve simply replacing a sticking transmission linkage and adding transmission fluid to correct a low fluid level. If neither one of those are...
Car won't start, but not battery
An engine that cranks normally but doesn't start is lacking fuel, spark, or both. Fuel delivery can be determined by checking fuel pressure, and injector pulse. Spark can be determined using an inline spark tester. Checking for any stored diagnostic...
Takes 3-7 tries before engine stays running
Hello. The symptoms you are experiencing, hard starting and an unstable idle speed, can be caused by a variety of issues. You mention that you replaced a few parts, namely ignition components, so they should be alright. The next things...
Transmission selector shaft seal leakage. Does it need to be fixed and how expensive is the repair?
If you are referring to the "manual shaft" seal pressed into a bore on the transmission case, which seal is typically around an inch in diameter, it is repairable (replaceable) on the car if there is physical access to the...
Engine noise when cranking. P0011 and P0021 codes
Hi there. The P0011 OBD-II error code (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) indicates that you have an over advanced timing issue, which might be the reason why your engine stumbles for a brief moment when it's cold and first starts. Ignition timing is typically...
My clutch pedal goes to the floor and doesn't return
Check clutch pedal assembly bracket for breakage or mis-position. It's also possible that the pressure plate is to blame. However, before diagnosing that you do have to confirm the hydraulics work. Even though the master and slave are "new", these...
What's causing the truck not to start i cut the anti theft wire while installing my radio
The anti theft system cannot be disabled on this vehicle. If you cut the wire for the system it should be restored to normal if you reconnect it using a good quality connection. If system is still activated after reconnecting...
Speedometer/odometer quit working.
The speedometer is electronically controlled. Typically, there is a mini stepper (positioning) motor mounted on the instrument cluster PCB and it receives a signal from a speed sensor within the transmission. A wiring harness interconnects these components. The speed sensor...
My Honda 2009 just got a new battery and new alternator 2 weeks ago. Now car starts but then shuts off in 10 seconds.
If the alternator is not a factory new or remanufactured then you may have an alternator that is not communicating with the computer and needs computer scan to check it and replace alternator with new one that is compatible with...
Related articles
4 Essential Things to Know About Your Car’s Muffler
The The muffler on a vehicle is designed to reduce the amount of noise coming from the exhaust system of your automobile. The muffler quiets the sound pressure that the engine creates by using acoustic quieting, which means the muffler...
The Best Used Cars to Buy If You Like to Go Off-Roading
Your Your best bet for off-roading is a 4x4 SUV. Depending on the model that pleases you most, though, you might have to shop around a bit to find a good used one. That’s simply because off-roaders typically become very...
Symptoms of a Bad or Failing Exhaust Clamp
If your exhaust is noisy, loose, or failing an emissions test, you may need to replace an exhaust clamp.
Browse other content
Estimates
Cities