Q: Mechanic changed A/C condensor and added refrigerant. Still dont work. Now the problem is the compressor. Wrong initial diagnosis?
My car a/c started to get slowly warmer last year, and then eventually it was not cool at all anymore. Went to the mechanic last week. He said that the condensor was broken and that there was no more refrigerent, so he replaced them. Got back my car, tried to use the A/C the next day, and got only warm air. I brought back the car to the garage, and now he says the problem is a broken compressor (which was working fine before according to him). Could it have just happen by chance unfortunately? Or is more probably that he did a wrong initial diagnosis, or the repair caused the new problem?
My car has 150000 miles.
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I open the hood?
The latch for releasing the hood is located under the steering wheel, near the instrument column. Pull the latch until you hear the hood release. This latch will unhook the hood, but won’t open it. After the latch has been...
How do I shift between 4WD and 2WD?
It’s easy to shift between four-wheel drive (4WD) and two-wheel drive (2WD) in your car. Here’s how. Slow your vehicle to a crawl (preferably 1-3 mph). Shift your transmission into neutral. Turn the transfer control case (the shifter that controls...
Engine misfiring in a 2007 BMW 328i
Your BMW is fuel injected so I'm guessing you cleaned out your throttle body. The next thing I would look into is the coil for the culprit cylinder, have a certified mechanic, like one from YourMechanic, inspect your vehicle (https://www.yourmechanic.com/services/engine-is-misfiring-inspection)...
AC stops working when idling
It is possible that your compressor clutch is producing more drag than usual, causing the near stall at idle. When the engine RPM is raised, the belt rotates faster, forcing the compressor to spin. It is also possible that you...
Check engine light and P0139 code on a 2006 Hyundai Coupe
You've got to realize that those things often pretty much weld themselves in. From the difference in the metal and the sensor, and the metal and the exhaust. I use special sockets that fit on them, which anybody can buy....
Idle and starting issues
You would need to have the system scanned when there is a no start to see if you are getting a crankshaft (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) and camshaft sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-camshaft-position-sensor) signals. The camshaft sensor may be hitting the camshaft when it is hot...
Why does my ABS lights in dash come on after driving for a while on my 2011 Hyundai Sonata
Hello. If this issue has occurred ever since the work was done then I would suspect that there is something that was not installed correctly. If you are getting noise also then the ABS wheel speed sensor may be contacting...
Is it worth replacing my throttle body to try to eliminate the epc light?
When the EPC light comes on, it often a problem in the throttle body, but not necessarily. If the light is on, it means the controller will have stored codes to assist in the diagnosis. It's not something you want...
Feels and sounds like front half shaft but no appearance of any break or leaks
The front axle CV joints may be worn even if the boots are good. You should also have the front hub bearings checked to see if they are bad.
Related articles
Honda Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Honda vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
How to Replace an AC Line
AC hoses are failing if the air conditioning system is not blowing cold air or the air is leaking out of the AC lines.
P2613 OBD-II Trouble Code: A/C Refrigerant Distribution Valve Control Circuit High
P2613 means a problem with the A/C refrigerant distribution valve control circuit which causes the air conditioning to not work properly.
Browse other content
Estimates
Services