Skip the auto shop - Our mechanics make house calls

Q: Manual shifting not working

asked by on

All of the gear selector lights are on. The manual selection of gears does not work, though auto shift works just fine.

A: The wiring harness should be checked for an...

The wiring harness should be checked for any shorts. Flexing with the trunk lid could cause shorts. I would recommend having a certified technician verify this issue in order to diagnose your manual transmission and perform the necessary repairs.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car vibrates at 35 mph and over

Hello there. Vibrations are a common symptom that have quite a few different causes. The most common causes are tires, rims, tire balance, wheel bearings, or ball joints. In some cases, when the tires are mounted onto the rims, a...

Q: Car air conditioning blows cool but not cold air

Air conditioning is a complex and delicate system. The only way to properly diagnose a system is with a lot of specialized equipment. There are too many variables to guess. A short list for a under-performing system are: a weak...

Q: Manual vs. automatic transmission for a first-time driver

I learned to drive on a standard transmission. It is not that hard to drive a modern standard transmission, because hydraulic clutches run smooth, and the shift is on the floor. It’s not like when I was a kid, when...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.