Q: Low coolant

asked by on January 26, 2018

I have a 2005 Chevy Monte Carlo flashing low coolant and service engine soon the lights are dim in the car I got a jump off and it still didn't work the car will not turn over but I hear the fuel pump when I turn the key to on position someone help

My car has 144444 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Van door jammed
Hello. This is a common problem on this van. Most of the time this occurs when the cable snaps inside of the door. When this occurs it can jam up the door internally making it hard or impossible to open...
Car stalls when starting
Hello, I am assuming that you have a reoccurring code for a crankshaft sensor. The connector for the sensor should be checked for corrosion and pin tightness. The wiring should be checked between the crankshaft sensor connector and the engine...
Check Engine light on due to misfire
Code P0301 indicates a misfiring issue. You likely need an ignition coil. There is a possibility that oil is leaking into your valve cover, which is causing this. If you haven't replaced the spark plugs, you will need to soon....
my gear shift is hard to move and keeps getting stuck
Try to move through the gears with the engine off and clutch pedal pushed in. If it is still hard then you may have bad synchronizers inside of the transmission. First, I would have the clutch rechecked to make sure...
Engine sluggish, hesitates during accleration
Hello. A flashing Check Engine Light on your vehicle typically indicates that there is an engine misfire. This can occur from a failing spark plug (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-spark-plugs) or more commonly a clogged or failing fuel injection unit (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-injector). I typically check...
Buzzing noise and shaking in the front end of the car
Hi there, thanks for writing in about your 2000 Chrysler Cirrus. The buzz is most likely coming from the blend door actuator motor on the evaporator case under the dash. The actuator would need to be verified as to which...
At >60mph speed when I lift foot from accelerator, there is vibration in steering. clunk noise on bumps.
As always, the first order of business is to confirm the diagnosis. If the Mechanic showed you "looseness" in those parts, that's fine but "a" concern is whether or not they are giving you "assurance" that once those parts are...
I have codes P0308 ,P0330 and p0133 in my vehicle
Hello. In order to be able to help you I need to know what kind of vehicle this is. The primary concern is that you have a misfire issue. This can be caused by any number of things so a...
Why would me 2002 Honda CR-V make a squealing noise when hitting the gas
Hello. This noise can come from a few different things. You are right that most of the time it is caused by a failing or loose belt. If the belt is loose then it may be the tensioner that is...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Traverse
You You might not always need all of the cargo and passenger space available to you when you buy a 2012 Chevrolet Traverse, but it’s nice to know it’s there. This seven-passenger crossover utility vehicle (CUV) has tons of space...
The Best Used Cars to Buy for Senior Citizens
Everyone Everyone needs a way to get around. You need to get groceries, get to doctors’ appointments, visit with family and more. However, senior citizens have very different needs when it comes to buying a used car than other demographics....
The Best Used Cars to Buy If You're a General Contractor
If If you're a general contractor, you probably aren’t in the market for a used car. More likely, you’re looking for a pickup truck, because you need to haul equipment and supplies to various job sites. Most contractors will likely...