Q: Light and then no power

This symptom is usually due to a low coolant level. Restrictions in the cooling system or air can also cause this same issue. I would first start by ensuring that your coolant is at its proper level. If the coolant...

I would recommend taking this to the dealership. There is a Technical Service Bulletin for the early Saab transmissions stating that there is a software update that can resolve this issue. I would have this issue taken care of sooner...

Hi Van, thank your for your interest! Our current services are expanding daily. Here is the current list of cities that we serve: https://www.yourmechanic.com/city. You can also visit https://www.yourmechanic.com/book/ to add a zip code to your service.

I would not suggest disabling your ABS (https://www.yourmechanic.com/article/5-essential-things-to-know-about-your-car-s-anti-lock-braking-system-abs) at any time, as it compromises vehicle performance and safety. As for you traction control (https://www.yourmechanic.com/article/how-does-traction-control-work), you should be able to turn it off manually using the dash mounted button. Your owner's...

Hello. This is a common problem on this vehicle. In some cases it is caused by one of the intake hoses coming loose but most of the time it is caused by a failure in the turbo bypass actuator. These...

Hey there. If the vehicle is overheating, the spewing liquid may be hot coolant. The area where the leak is coming from may have a component that is leaking itself or has a leaking seal. If you take vehicle to...

Hi, and thanks for contacting YourMechanic. First, try checking the ABS sensors (https://www.yourmechanic.com/services/abs-speed-sensor-replacement) for a proper connection. You may need to remove the sensors and clean them off. If there was any moisture on the sensors while the vehicle sat,...

This symptom sound like an issue with the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) sensor. The sensor is either dirty or oily. Remove the sensor and clean it with electrical cleaner. Then after it dries, put it on and retest the...

Hi there. If I had to guess, based on your inquiry, my first thought would be to check your oil level, as commonly this type of noise is related to a lack of lubrication in the cylinder heads and the...