Q: Just wanted to confirm will gasket and front seal be replace
Just wanted to confirm when my mechanic arrives he will replace the timing cover to include the front seal and timing cover gasket.
My car has 78500 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Car not starting smoothly.
Hello, it sounds like you have a leaking injector. When you hold down the gas pedal, it puts the computer into clear flood mode and does not inject fuel into the engine. Once you clear the fuel, it starts and...
My Toyota Camry is knocking and ticking.
Ticking and knocking usually isn't a good thing. Does the speed of ticking increase with engine speed while sitting still? If so this means that it is coming from the engine. If the sound increase in speed on as the...
Front lower control arm bushings loose
Suspension parts wear over time. The style of your driving, as well as the condition of the local roads, can have a significant effect on the amount of time it takes to wear. The suspension is one big system; it...
Timing belt replacement
When a timing belt breaks it will typically just snap without warning, and when it does, you will damage the motor from possible bent valves. It would be safest to follow the recommendation and have it replaced to avoid any...
Could someone tamper with your timing chain and cause it to break?
Hi, thanks for writing in. Although vandalism could happen, but its highly unlikely due to the chain being fairly difficult to get to. The most common causes for the chain to fail is a chain that has stretched over time,...
Mazda 3 2010 has random starting issues
If the engine is not cranking, that is the starter motor is not engaging the flywheel and turning the engine over, that doesn't implicate the ignition system (e.g., ignition coil(s)). A possible cause of your no start condition is the...
Replace Canister Purge Valve.
Billing question was sent to CS for the cost of labor to install a canister purge valve in the fuel system on a 2010 Ford Fusion with a 4L-2.5L engine.
08 BMW 328i. DSC Malfunction,Brake lights , Car is shaky,airing notice coming from engine, can't go over 45mpb..any idea?
This is typically related to a speed sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) problem. The reduced speed is due to the engine control module putting the car into reduced power mode as a result of the intermittent signal from the speed sensor. The check...
2004 f150 4.6l 2v was over due for oil change started making ticking noise checked oil very low. whats making the ticking noise?
Hi Mike. Thanks for contacting us today. The ticking noise is typically caused by low oil levels or low oil pressure problems due to excessive wear and tear with oil pump or dirty oil. In most cases, simply having the...
Related articles
2012 Jeep Grand Cherokee vs. 2012 Dodge Durango: Which One Should I Buy?
Medium to large SUVs are a fun class of vehicles: plenty large enough for moving people around, but if you really want to get out there in the mud and have some fun, they are still good for that type...
The Best Used Cars to Buy If You’re a Photographer
If If you are a photographer, and you’re considering buying a used car, the big thing to consider is the type of photography you do. Thanks to the advances in digital photography, chances are you’re not hauling around a lot...
The Best Used Cars to Buy for Dog Owners
Dog Dog owners are a special breed of drivers. When they shop for a used car they have a list of requirements that can be quite different from other drivers, which tends to make the process a bit of a...
Browse other content
Estimates
Services
Maintenance