Q: Is there a way to permanently turn off the rear parking aide on a 2017 Mustang?

That is a warning light to tell you that your transmission is running to hot. This could be due to driving the car very hard or driving in very hot weather. The vehicle is asking you to stop and let...

Hello. It is difficult to get much better fuel economy (https://www.yourmechanic.com/article/5-essential-things-to-know-about-fuel-economy) then what you are currently getting. The only way is by driving the car easy and maintaining it. Using synthetic oil (https://www.yourmechanic.com/services/change-oil-and-filter), a high flow air filter (https://www.yourmechanic.com/services/air-filter-replacement), making...

The computer should be scanned to see why the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on by a mechanic. The Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is an indication that the computer has a fault in the systems that it monitors and has...

Hello - No, it is incorrect to assume that you couldn't install the new tensioner even though it is of different length. Was the new tensioner longer or shorter? If shorter, there may not be adequate tension on the belt,...

Hi there. If you have received a recall notice from the dealership or manufacture, it is probably for a safety reason. Recalls are performed by the dealership as no cost to the owner of the vehicle. If your vehicle has...

Hi there. To answer your question in the most simple terms, yes; it is possible to link multiple engines to a single drive shaft. However, this is something our mobile mechanics would not be the right source to ask how...

What you are describing may be a result of a faulty speed sensor, potentially low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a even a faulty transmission control solenoid. As your vehicle travels down the road, the computer analyzes data being sent by...

This code is triggered when there is excessive voltage detected in the heated oxygen sensor circuit. This may cause the oxygen sensor to produce faulty readings resulting in improper air/fuel adjustments to be made by the computer. As you may...

If the ABS and traction lights are on and stay on then there is a problem in the system and will need to be tested. It is okay to drive the vehicle with the understanding the systems are inactive and...