Q: Is the camshaft valve timing and the variable valve timing the same thing

asked by on February 09, 2018

is the camshaft valve timing and the variable valve timing sensor the same thing?

What is the Intake Valve Timing control solenoid valve?

My car has 175000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I delete or edit the contacts in the Uconnect phonebook of a 2012 Dodge Ram?
If you are editing a contact, press the Uconnect phone button, which is a telephone symbol on either the center console or the steering wheel. The system will say “Ready” and beep, at which point you should say “Phonebook edit...
Car cranking, but not staying on
If a car cranks and doesn't start, I would typically check the spark and fuel, either of which could be the cause of your problem. If everything tests out ok and the truck still doesn't start, then I would suspect...
Brake lights don't turn on when brake pedal is pressed.
Hello, thanks for writing in. Yes, the symptoms you describe are typical of a faulty brake light switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-brake-light-switch). The brake light switch, which is usually mounted at the base of the pedal, is the electronic switch responsible for powering...
Car won't start - 2006 Mercedes E350
One common issue that occurs when the battery cables are not removed while doing service on ABS brake systems is that it may trigger a few error codes to be stored in the ECU after removing the calipers. In most...
Could the power steering pressure sensor cause my steering wheel to be hard or hard to steer?
Hello. The pressure switch (or "sensor") (https://www.yourmechanic.com/services/power-steering-pressure-switch-replacement) on your vehicle supplies a signal to the engine computer to increase engine idle speed as the power steering line pressure increases. If the switch were bad, what you would notice is the...
Fuel consumption issues after crankshaft position sensor reset
Hello. If your lights are coming on and off then there may still be an issue somewhere with the vehicle. If there was a recent reset due to an issue with the crank position sensor it may be possible that...
Battery saver system car won't turn and battery good and starter. Whole dash illuminates when I turn key though, no alter
Have the battery load tested (https://www.yourmechanic.com/services/battery-is-dead-inspection) in case it was short circuited. Reverse polarity, at the battery, in a 12 volt electrical system on a car can cause a variety of effects including damaging the alternator, diodes and the numerous...
2007 Buick LaCrosse, startup noises
There are a number of things that could make an engine noisy when starting up. Depending on the specific type of sound you are referring to, this will determine how to properly diagnose. If there is a bit of a...

Related articles

A Buyer’s Guide to the 2012 Toyota Prius C
Car Car buyers in the market for a sub-compact car with a low price tag should really take a look at the 2012 Toyota Prius C. Toyota led the way with hybrid technology when they first introduced the Prius, and...
A Buyer's Guide to the 2012 Chevrolet Caprice PPV
With With the phasing out of the long-lived and beloved police cruiser in the form of the Ford Crown Victoria, 2012 brought a new car into town via the Caprice PPV (Police Patrol Vehicle). This new incarnation of an old...
How to Get Nissan Dealership Certified
Nissan dealerships offer auto technician jobs to those certified through Nissan’s Service Career Opportunities for Professional Enhancement program.