Q: Is it okay to change brake pads and them bleed the brakes later?

Reclining the front seats is very easy. First, locate the recline lever, which is on the side of the seat, near the back. Next, lift the lever, and move the back of the seat into whatever position you desire. Finally,...

There will be a few bolts with ten millimeter heads. You will need to remove these first. Usually, you will be able to slide the reservoir out, but sometimes you will need to remove the fan motors as a complete...

Hello. If there was a delay in the engagement of the starter, but it was fine once it did engage, then most of the time this is caused by an issue with the starter relay or the ignition switch. Both...

As you know, this may be a result of a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement). This may also be a result of a failing fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) as well. This is what monitors the fuel pressure in the system and...

Hi there. A low coolant level can illuminate the service light and create the heating and AC problem you have described. Check the coolant level while the engine is cold and top it off as necessary. Also, look around the...

Hello, thank you for writing in. Great job on the electrical testing thus far! A wiring diagram for the vehicle will work wonders for you if you can obtain one. If you are referring to the ignition switch fuse, then...

It sounds like you may have a power steering rack that may be putting too much strain on the power steering pump causing it to leak or fail. The rack and pinion gear set does two things: It converts the...

The overheating should be resolved first as continued operation of the engine while overheating can damage the engine. The most common causes of overheating include low coolant level (including that due to leaks), a faulty thermostat, a plugged radiator, a...