Q: Is it best to replace the engine?

asked by on January 16, 2017

I want to know if replacing the engine with a rebuild engine is a good idea? And if changing it, would that replace the knock sensor 2 as well?

My car has 200000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Power steering malfunction
There are multiple issues that could cause this power steering failure. On a hydraulic power steering system, the power steering pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump), hoses (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-hose), or rack and pinion assembly could all cause the steering wheel to be very difficult to...
Stalls while applying throttle. Already changed two warm up regulators
Hello. I think you may have a problem with the cold start valve (https://www.yourmechanic.com/services/cold-start-injector-replacement) not dumping the proper amount of fuel to allow the car to start and remain running on a cold start. The distributor should be checked as...
Temperature gauge -- engine running cooler than normal. Below 90 only while driving.
Hi, thanks for writing in. If the engine is running cooler than normal, this could mean the thermostat is stuck in the open position. This will cause the engine to run cold and not warm up properly. This can cause...
Every time I drive the epc light goes on and it's says check engine service now and sometimes it just cuts off while driving
Hello. If your warning lights are on then the first thing I would do is retrieve the trouble codes, as they will likely reveal some insight on what the issue may be. Warning lights (https://www.yourmechanic.com/services/warning-light-is-on-inspection) and stalling (https://www.yourmechanic.com/services/car-is-stalling-inspection) can be...
When replacing my ball joints on my 2005 dodge Strauss do I need to replace the control arms as well
Hi there. When changing out the ball joints, you don't need to change the control arms if you have a replacement ball joint. However, if you are wanting to replace the bushings and the ball joint, then you may get...
Mazda CX-5 2016 GT - Central display blank, music from radio/CD working. Would this hard reset help me as well?
You can disconnect the battery cable (https://www.yourmechanic.com/services/service-battery-cables) and let out all of the power source to the vehicle by turning on the ignition switch with the battery disconnected. Then hook up the battery and the radio should be reset and...
The RPMs rais between 3k and 4k without a change in throttle position, speed stays the same, and it does this at different speeds.
There are a number of things that could cause this to happen in a vehicle with an automatic transmission like yours. It sounds like what you are describing is that the transmission is slipping slightly while trying to maintain a...

Related articles

A Buyer’s Guide to the 2012 GMC Yukon
When When you want a big SUV that can hold its own, come what may, you’ll be happiest with a GMC Yukon. Although the inside of one of these vehicles can sometimes resemble an upscale hotel room, the 2012 GMC...
A Buyer's Guide to the 2012 GMC Yukon XL
When When you want a huge vehicle with plenty of luxury inside, you’re probably going to be happiest with the 2012 GMC Yukon XL. Key Features The 5.3-liter V8 engine on this full-size SUV isn’t surprising, but its fuel economy...
How to Get GMC Dealership Certified
GMC car dealerships offer automotive technician jobs to mechanics who are certified through one of the many programs they have available.