Q: Installed a clutch plus master cylinder. Clutch seems to be not releasing right.
Installed new clutch found a bad master cly replaced it rebuilt slave cly. Up on Jack stands goes thru gears ok but rev not going in with slaming it. Take off stand feels like no clutch and brake locks up.
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Where are the fuses located?
All of your car’s electronic systems use fuses to protect against over voltage situations. If there wasn't a fuse in place, a power surge could destroy an accessory. With a fuse in place, those aren’t a problem. When a power...
No acceleration
If this started happening right after being jumped then there may be an electrical problem. If the battery cables were hooked up backwards at any point then it may have blown a fuse (https://www.yourmechanic.com/services/fuse-replacement). A mechanic would usually start by...
Changing timing belt along with other parts in 2004 Proton Saga
That is a 12-year-old vehicle. It probably isn't a waste of money at this point. A lot of really good part places now, when they sell you a timing belt kit, they include a timing belt, the water pump, the...
Spike in costs around 120,000 miles?
Hi there. Your question of what to expect in service costs is difficult to answer. There are variables involved, whether the vehicle was driven hard by the previous owner(s), or whether the vehicle has had maintenance performed at the recommended...
Would a major leak from my exhaust back box cause it to fail the emmisions test and LAMDA reading
Hello - while an exhaust leak can have a minor effect on emissions, I would not expect that to cause a "Fail" - UNLESS your state or metro area does tolerate an exhaust leak for safety reasons (carbon monoxide poisoning...
Rain affects engine performance and shifting.
If you are having random problems throughout the vehicle when it is raining then you most likely have various electrical connectors not keeping out the water and wire connections are shorting causing the erratic issues. You will need to go...
Locked keys in trunk.
Hi there. You can use a slim jim tool or a coat hanger to open the driver door to get to a lever behind the driver seat to open the trunk. If your vehicle does not have a lever to...
what are the two sensors called that I need to replace on my 2013 chevy malibu that reads AC unit off due to high engine temp
Hi Ruben. Thanks for contacting us today. The sensors that will monitor data are the engine temperature sensor and the coolant temperature sensor. They work together to relay data to the ECU. If the engine temperature is too hot, an...
Rear wheel brake drum stuck
The problem is in the parking brake mechanism or rear caliper assembly if rear disk brakes. You may need to release rear brake shoes by turning rear adjuster through rear backing plate to get drum off to find out what...
Related articles
A Buyer’s Guide to the 2012 Hyundai Veloster
The The 2012 Hyundai Veloster has a practical design while starting at a modest price point. Its unique styling has an eye catching design makes it both fun to look at and exciting to drive. Combine the unique look, price,...
Symptoms of a Bad or Failing Fan Clutch
If your car has a fan clutch, common signs include the vehicle overheating, the cooling fans working very loudly, or engine performance decreasing.
How Long Does a Clutch Switch Last?
The The clutch switch, also known as a clutch sensor, is a safety device on most modern manual transmission vehicles. Its purpose is to prevent the engine from starting while the vehicle is in gear. The switch is normally mounted...
Browse other content
Estimates
Services