Q: if I need to replace engine and transmission mounts for c230 2005, how many mounts will I need?
I am trying to buy the parts, but I don't know how many I need to replace all engine and transmission mounts.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Driver's seat not working properly.
The switch on this seat is a multi-position switch and would need to be tested to see if it is sending power to the roll back motor. Depending on availability, the seat bottom is not serviceable and would need to...
Transmission Jerks
Have the drive shaft joints and rear axle pinion bearing checked to see if they have excessive play. Also, check to see if you have any broken motor or transmission mounts. This should help narrow down the problem for you....
front display module not working,radio buttons not working. 2010 escape v6
Hello, thanks for writing in about your Ford Expedition. You should have the radio display removed and then install the fuses (https://www.yourmechanic.com/services/fuse-replacement) again to check if they will blow again. If the fuses don't blow again then the radio is...
Loud roaring sound - 2008 Honda Ridgeline
Hi there. In many cases, the loud noise you're hearing upon start-up is related to a loose drive or serpentine belt. The fact you hear this noise when you turn might indicate that the power steering pulley or drive belt...
High pitched whine noise is coming from behind or below glove box area. The noise occurs at low rpm at any speed, especially while turning left.
Hi there. The sound that you are hearing is probably from the blower motor to the heater / air conditioning evaporator. Remove the fuse to the blower motor and see if the sound stops. If the sound stops, then the...
Blinking engine light
The engine shaking and idling rough with a flashing check engine light is an indication you have a misfire in the engine. If you have a computer scan it should show ignition misfire codes to one or more cylinders misfiring....
Why would I continue to have a P0106 code in my 2009 Ford Explorer
If you are continuing to get this code then you either got a bad sensor or you have an issue with a clog in the EGR lines. Both are common. Also, if the check engine light was not cleared after...
Horn keeping blowing when key is taken out ignition.
The issue is with the security system on your car. Try disarming the vehicle by holding down on the unlock function to the key fob. If the locks on the car do not work while the horn is sounding, then...
I have a 1997 nissan maxima that has a misfire code of p0300 and p0302.
It's common to find the source of a misfire in the ignition system. Checking the coils with an Ohmmeter doesn't really tell you much though. When I diagnose a misfire, sometimes I find it helpful to swap the coils and...
Related articles
A Buyer’s Guide to the 2011 Mercedes-Benz ML450 Hybrid
The The 2011 Mercedes-Benz ML450 Hybrid is Mercedes' first hybrid SUV. It can perform light off-roading tasks while still being able to tow a good amount of weight. It has excellent fuel economy and drives just like the Mercedes-Benz M-Class...
A Buyer’s Guide to the 2012 Mercedes-Benz E-Class
The The Mercedes-Benz E-Class is a midsize luxury vehicle that has been one of the most popular options for a number of years. The 2012 models, which now include a coupe, a wagon, and a convertible as well as the...
A Buyer's Guide to the 2012 Mercedes-Benz GL350 BlueTec
If If you love a diesel engine in your SUV, but still want to ride around in luxury, your perfect vehicle may very well be the 2012 Mercedes-Benz GL350 BlueTec. Key Features The most important feature worth noting is the...
Browse other content
Estimates
Maintenance