Q: if a mechanic said he replaced your wheel bearings would it be worse 5 days later

asked by on

picked up car from mec. said he replaced my wheel bearing noticed right away the same sound in rear. how would i no if he replaced it or just said he did

My car has 130000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. if a mechanic said he replaced your wheel bearings would it be worse 5 days later

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Range Rover Sport v6 2.7 with fault code p2455 but the car does not have any sensor or circuit for the dpf.

Hi there. The DPF apparently was not installed in all markets, which may cause issues if the vehicle did not have it when manufactured, but is transported and sold into a market which does require it. I would check with...

Q: I smell vapor in the car and the car is starting and cutting right off

A code for the canister close valve will not cause the engine to not run. What would cause the engine to not run, and may be the cause of the fuel vapor smell in the car, would be a leaking/cracked...

Q: Vehicle won't start after I switched the ECM.

Hi there. First check the battery cables and make sure that they are clean and tight. Then check all of the sensors and make sure that all of them are connected. Then check the ECM and make sure that the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.