Q: If a car crashes into me and the leaves the scene, what should I do?

asked by on January 22, 2016

Some car grazed my car in the parking lot, I was not able to catch the license plate of the offending vehicle. What should I do?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I reset the factory settings?
When the system reset is used, then your cars adjustable settings will be returned to the factory settings. To perform this command, follow these steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed, then press...
Grinding noise when braking
You should have your brakes inspected for any issues like metal to metal grinding or another related issue. This may just be a brake pad service issue or a more serious problem with the ESC. Only a thorough check will...
ABS light on
the ABS light is most likely on due to one or more of the wheel speed sensors going bad. Some front and rear model sensors will need the complete hub replaced. The system will need to be tested to see...
Sputtering and missing while driving/ fuel pump replaced 4.6 liter engine Lincoln
Hello - while it's possible that the cause of your misfire under load (https://www.yourmechanic.com/question/car-misses-under-load) is a bad ignition module, worn/weak spark plugs, or ignition coils (in that order) are far more likely to cause the misfire you're experiencing. First task...
How much does a gear replacement switch usually cost?
Hi there. We're not quite certain what you're requesting. If you could provide us with more details about what problem your Acura is experiencing or what you are wanting to replace, this would be quite helpful.
Truck won't shift out of reverse but the shifter is in park.
Hi there. There are two different things that could be happening. Either the shifter cable is broken and came off the shifter linkage on the transmission or the transmission rod inside the transmission pan that connects to the main valve...
Creaking wood sounds on acceleration
Hi there. There could be a couple of things going on in this scenario. The motor mounts may have loosened and need to be re-torqued. There could also be worn suspension parts that are now creaking under the torqued of...
How Much should a valve body replacement cost Range Rover Sport 2010
Hi Richard, Thank you for contacting YourMechanic! To set up the quote for the valve body replacement for your vehicle, we need some extra information in order to get you the most up-to-date prices on parts and labor. Please go...
Aux cigarette lighter
Radio repair and replacement services are available from YourMechanic. Please request service using YourMechanic's radio service page (https://www.yourmechanic.com/services/car-radio-is-not-working-inspection). Typically, cigarette lighter outlets can be used to power 12 volt devices and power inverters can also be plugged into the outlet...

Related articles

Symptoms of a Bad or Failing Brake Wheel Cylinder
If your car has drum brakes and a spongy brake pedal, poor brake response, and leaking brake fluid, you may need a brake wheel cylinder replacement.
P2616 OBD-II Trouble Code: Camshaft Pos Signal Output Circuit High
P2616 means the camshaft position sensor has released a high output signal due to a faulty, broken or shorted wiring, or fluid contamination.
How to Install Hood Pins on Your Car
Hood pins are used as a secondary restraint for the hood and are attached by a pin and plate drilled through the hood.