Skip the auto shop - Our mechanics make house calls

Q: Iat sensor

asked by on

Mass air flow sensor code appear changed and check 4 wires then faulty ground in fuel pump check and it was faulty replace. Fuel pump . the fuel filter on chassis was replaced end last year. No code for mass air flow code came up but throw intake air temperature sensor and o2 sensor. Check harness and wires were good then replaced iat and both 02 sensors also replaced coolent temp sensor. Reset computer and codes still appear. For iat.

My car has 200000 miles.
My car has a manual transmission.

Hi there. You might find this article we’ve written and posted here on our website very helpful in helping to diagnose an intake air temperature sensor. The component is called either an IAT (Intake Air Temperature) or Air Change Temperature (ACT) sensor, but the symptoms are virtually identical. Without being there to inspect your car personally, this is really the best advice we can offer. Thanks.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Long hesitation when starting

You may have a fuel pump that is not able to hold fuel pressure to the injectors. You will need to get the fuel pressure checked to see if the fuel pressure is leaking down after shutting off the vehicle....

Q: Car overheating

Coolant level, condition, and flow rate need to be checked. Also the 3.0l Camry uses a hydraulic fan assembly. The components of this system, which include a pump and hydraulic fan motor, need to be checked for proper operation, as...

Q: Stalling when taillights are on

You should check the connector to the ignition switch and switch for overheating on one or more terminal. The connector will get melted and cause the switch connection to not handle a full load and stall when another load like...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...