Q: I was backing into my drive way and my truck slipped of the edge hitting some thing causing the traction control to kick in and no
No smells but there is a whinny noise and rev up a lot when I press the gas to speed up then before it will chang gears I have to release the gas petal and it will change gears. It will go into reverse but not drive in revers. Will rev up and everything but drive.
I was backing into my drive way and slip of the side as has happened before but it hit the driveway this time and thru in into traction control that's when the whinning stated.
My car has 105000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Shaky engine.
How many miles are on your car? High mileage cars can have worn out ignition components causing a weak spark at startup or weak motor mounts might make vibrations more noticeable, I would recommend a mechanic from YourMechanic look into...
Transmission slipping.
This fault code is set when the torque converter lock up function does not activate within one to 3 minutes of cruising at least 50 miles per hour. There are several things that can cause this fault, anything from worn...
Check Engine light coming on after timing belt replacement.
Hi there. Fault P0018 after a timing belt replacement generally indicates that at least 1 cam is off timing, usually by one one tooth if the engine still runs well. The correlation fault is saying that the crankshaft position in...
Fail Safe Mode coming up on dashboard
The output speed sensor is a very important sensor for the computer in your BMW 540i. It uses this signal to determine shift points as well as when to lock up the torque converter. If the computer detects a problem...
Hood sensor not working
Hi. The sensor is most likely broken and needs to be replaced. You can get rid of the warning light by unplugging the sensor until you get a replacement. The way the circuit works is when the hood is open,...
How long should it take to change the thermostat on a mazda 6?
Depending on the engine you have it will take anywhere from 1.5 to 2.5 hours.
I'm not sure what to do or what I need to have fixed or replaced
Hello. If there is a ticking or knocking noise coming from the top of the engine, then it may have the damage that you mentioned. If the noise is not very loud, then it may be normal as these engines...
my volvo s70 check engine light and abs light are on
The fact that the check engine light is on, as well as the ABS warning light, means that diagnostic trouble code(s) have been registered and stored in the engine computer. Although the vehicle may be functioning normally now, you may...
Related articles
A Buyer’s Guide to the 2012 GMC Terrain
When When you look at smaller SUVs like the Honda CR-V and the Toyota RAV4, do you wish for just a little bit more space? But then when you look at the larger SUVs like the Ford Explorer or the...
A Buyer's Guide to the 2012 GMC Yukon XL
When When you want a huge vehicle with plenty of luxury inside, you’re probably going to be happiest with the 2012 GMC Yukon XL. Key Features The 5.3-liter V8 engine on this full-size SUV isn’t surprising, but its fuel economy...
The Best Used Cars to Buy For a Graduation Gift
Your Your little bundle of joy has grown up and on the cusp of entering adulthood. Graduating is a milestone, and you want to reward their hard work and show how proud you are. Buying a used car is a...
Browse other content
Maintenance
Cities
Estimates