Q: I've replaced the power steering pump and bled the system, but I continue to get leakage at top of the reservoir.What causes fluid

The panic feature is an important safety feature in your vehicle. When the panic feature is activated, the horn will sound, and the hazards will flash for 30 seconds, which draws attention to your vehicle if you feel unsafe. To...

While the information provided is a bit limited, it does lead me to believe that your Nissan may be experiencing an electrical problem with the starting system. Since I am unable to give a proper diagnosis, I highly recommend enlisting...

The main cause of coolant leaking from this vehicle is a crack in the radiator. If the coolant is leaking from the front of the motor, then this may be a leak in your water pump. I would suggest having...

If you can put the transmission in any gear with the engine off easily but cannot get it in any gear when you start the car with the clutch in, then you have a clutch system problem. You will have...

If you have been overheating your engine over and over, then it will cause damage to the heads and engine. Look at the oil to see if the oil has coolant in the oil. It sounds like you now have...

This is a common symptom of a misfire (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) or potentially a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) which when faulty, can cause the misfire to happen due to an improper air/fuel mixture being supplied to the engine. The idle...

Hi there - many manufacturers program the transmission to hold 1st gear longer (https://www.yourmechanic.com/services/car-is-slow-to-accelerate-inspection) when ambient temperatures are very low. This allows the engine to warm up faster, making your heater work more quickly. It also revs the engine more...

The information you are looking for should be in your owners manual. The manual will tell you where each fuse box is, describe the circuit each fuse controls and show the amperage rating of each fuse so when they are...

Code P1569 refers to a faulty VTCS solenoid, specifically to, low voltage within the circuit. When this happens, the PCM detects this low voltage triggers this error message. Code P0455 refers to a leak in the EVAP system. This is...