Q: I turned the key to start and it tries to start but won't. I turned the key to on and it is still trying to start.

asked by on

Was driving truck going 45 when all of a sudden it turns off stopped tried to restart turns but wont start seems like it want to but no luck keep trying but when release key to on it keeps going on

My car has 110000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. I turned the key to start and it tries to start but won't. I turned the key to on and it is still trying to start.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Ignition key replacement on locked car.

Hi there. If the key is stuck in the ignition then the ignition lock cylinder is either bad or you have a dead battery. I would test the battery first and see if that is the problem. If the battery...

Q: I have a 1995 dodge ram 1500 with a 5.9 L Magnum and it is making this weird noise that started after a heater core exchange

Hi and thanks for contacting YourMechanic. First find all of the vacuum lines that are cracked and replace all of them. Then check the heater control valve to see if it has a vacuum leak on it. With the heater...

Q: Average tune up cost on Nissan versa 2010 1.6 4 cycl.

There is no average cost of a tune up because such a service is no longer specified in the Factory Service Manual. Tune-up is a term that was mainly used decades ago when carburetors existed and ignition system distributors required...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.