Q: I scan the car and this two codes comes out P2106 and P2135 and i will like to know what can i do if i have to replace all the par

If your car is not overheating and has the proper amount of antifreeze in the system, then your problem is most likely caused by a problem with the temperature blend door. The blend door failure can cause your temperature control...

Four-wheel drive is one of the best ways to ensure safety and efficient vehicle operation in less than ideal conditions. Whether you’re driving on a gravel and dirt road , driving in inclement weather, or simply in tow, four-wheel drive...

Hi. It sounds like your water pump, or perhaps another part of the vehicle, may be leaking. It would be best to have a professional technician, such as one from YourMechanic, pressure test the vehicle to determine where the leak...

The vehicle stability control (VSC) light and code P0420 (https://www.yourmechanic.com/article/p0420-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-1-by-jamahl-walker) are for two different problems. The VSC system would need to be tested for codes for that system. The code P0420 is for the O2 sensor or problem with a...

Hi there, thank you for asking about your 2003 Infiniti FX45. The battery replacement has activated the "immobilizer" security feature. Consult your owners manual for instructions on how to disarm the system. Also, after replacing the battery, there is a...

Hello. The code is for the exhaust camshaft not in the position that the ECM has commanded it to be in. You could have problems with the cam sensor, camshaft control system, or wiring. Make sure that you have been...

Hello. From what you describe, it would appear that your vehicle may be experiencing more than one issue. Oil on the spark plugs (https://www.yourmechanic.com/services/oil-is-leaking-into-spark-plug-well-inspection) can be caused by a few different things. If you also found oil in the spark...

The MAP sensor is usually located under the intake manifiold on most vehicles. This sensor needs to be very near to the combustion chamber to determine if a knock has occured. The intake manifold will almost always requre removal (https://www.yourmechanic.com/services/intake-manifold-gaskets-replacement)...

Hi there: It really depends on what type of fluid is leaking and where it's coming from which will determine the corrective course of action. If you're leaking coolant, it could be from a coolant hose, connection or a cooling...