Q: I pressed the brake to stop fast and the breaks made a grinding noise what is wrong with the breaks?

asked by on February 15, 2018

I had to break fast and when I did the breaks made a grinding noise what is wrong with the breaks?

My car has 87063 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I return all vehicle personalization to factory settings?
You can customize many of your vehicle’s settings using the vehicle personalization setting. You can also use the vehicle personalization to return all of the customizable features to their factory settings. To return to the factory settings, use the audio...
Possible alternator problem
Hi. An illuminated dashboard charging light is almost a sure sign that the alternator needs to be replaced. If the light is not on and you suspect a problem with the alternator, there are a few ways to test it....
Squealing brakes
Hello. Your brakes can make noise for any number of reasons. The noise may even be coming from another part of the vehicle. If the noise occurs anytime the vehicle is moving then you may actually have a failing hub...
Why is my car overheating? 2011 Chevrolet Cruze
Hi. It sounds like there may be a problem with the radiator being clogged (https://www.yourmechanic.com/services/radiator-replacement) or just not operating properly. If the radiator is clogged or not operating properly, it will cause the car to overheat and the heat to...
Car won't start - 2001 Mitsubishi Galant
The engine requires spark, air, and fuel to start and run. If spark or fuel aren't present, it will not start. If the fuel pump was replaced for being faulty, the presence of fuel should be checked for first. If...
Continuous camshaft adjustment (LEFT): Incorrect position of the exhaust camshaft (P0025)"
The P0025 code is telling you that the exhaust camshaft timing is running late. This is not necessarily a sensor issue, but more likely a mechanical one. The variable camshaft timing is controlled by a hydraulic device that is part...
How many transmission mounts rubbers does my car have?
Hi there. There are 3 different mounts used for your vehicle. There is a left engine mount and a right engine mount (https://www.am-autoparts.com/products/engine-mount/AM-25555066.html) and a transmission mount. Both the engine mounts are the same and the transmission mount is flat...
Can you still get r-12 to service my a/c?
As you may know, R-12 refrigerant was phased out back in 1994 and replace by R-134a, however it is still available in select places. If you are looking for a small amount such as one or two cans, you may...
PCV Valve
Too much air flowing into the intake causes the engine to lean out, as a result of too much air in relation to the fuel and misfire. At an idle, the PCV valve restricts air flow, to reduce this problem....

Related articles

A Buyer’s Guide to the 2013 Dodge Dart
It’s It’s back, and better than ever. In the first incarnation of the iconic Dodge since 1976, the Dart has been updated, beatified, and turned into a compact force to be reckoned with. This zippy little machine is tough to...
A Buyer’s Guide to the 2013 Scion FR-S
This This sporty little twin of the Subaru BRZ offers the same light, fun to drive platform but in a bit more spartan, budget-minded form. The marriage of affordability and sports car-like driving is a successful one in the 2013...
How to Customize a Chrysler 300
The The Chrysler 300 (https://www.yourmechanic.com/article/a-buyer-s-guide-to-the-2012-chrysler-300) is an extremely popular model of sedan with sleek styling reminiscent of more expensive brands like the Bentley at a far more affordable price. It’s a great long-distance cruiser with get-up-and-go, which inspires great loyalty...