Q: I just replaced my radiator but my tempature gauge is still going to hot

If your car has an integrated mechanical key and remote, you’ll need to know how to use that key to crank the engine. It’s not all that complicated, but here’s the rundown of what you need to do: Make sure...

What you want to do is jack it up and get under there with a rubber mallet, have somebody start listening to the rattle, and hit them up with the mallet. After this, the mufflers will often no longer rattle....

Hello. This is a sign of potentially bad or worn wheel bearings (https://www.yourmechanic.com/services/wheel-bearings-replacement). When wheel bearings wear out or become damaged due to dirt or debris or lack of proper lubrication, they will cause this type of vibration which is...

Hi there. Disconnecting and re-connecting the battery, although the right thing to do while working on the fuel system, has tripped the security system and is not allowing a "start" sequence. (You don't mention it, but the security light in...

What you must of seen is a mechanic using sealer on the outside of the seal so it will seal any leaks between the seal and the front cover. This is okay to do. Before the balancer is installed you...

Hello. Locating a coolant leak can be a challenge. The coolant system operates under a low pressure. When you need to locate a leak, you must create that pressure. There is a tool called a coolant pressure tester that can...

Hi Pat. Thanks for contacting us today. The codes you've listed are Dodge specific OBD-II codes that indicate that the Governor pressure sensor is either faulty or relaying false information to the ECU. This is likely the source of your...

To resolve this, the trouble codes will have to be downloaded, interpreted and followed up on in terms of performing specific diagnostic tests. To obtain the stored codes, I would recommend requesting a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) and the...