Q: I hear a loud clicking noise when I start my car

asked by on

I just got recently just got an oil change and filter change now I am hearing a loud clicking noise when I turn the car on. What would cause the noise?

My car has 32495 miles.
My car has an automatic transmission.

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. I hear a loud clicking noise when I start my car

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I replaced my DRL on my 2016 Jetta but the indicator light is still on

Hi Tony. Thanks for submitting your question today. If the Daytime Running Indicator light is still illuminated after completing these repairs, then it's likely that an error code is stuck in the ECU and simply needs to be removed by...

Q: after oil change the oil pressure light comes on and off

You used the correct viscosity rating. If the oil level is above the full line, reduce it to the full line or below on the dipstick. If the oil level is too high or too low that could cause the...

Q: There is air escaping from the front radiator grille on my Chevy Cruze. It started when I shut off the engine and lasted about ten minutes.

Hi there. The hissing sound that you are hearing at the front grill of your vehicle is the radiator having a split core. I recommend replacing the radiator and not driving the vehicle with the conditions that the radiator is...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.