Q: I have just replaced my wheel bearings, rotors, brakes,and calipers on my 2001 continental but there is still grinding. What could
I have just replaced my wheel bearings, rotors, brakes,and calipers on my 2001 continental but there is still grinding. As soon as I let up off the gas it immediately starts slowing down and grinding. What could this be? It doesn't do it while I am on the gas, just as soon as I let up off the gas.
My car has 1414100 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Transmission gears slipping when I’m driving
The transmission on your Santa Fe has over 15 technical service bulletins (TSB) that could be the cause of your transmission issues. The first thing you should do is have YourMechanic scan the transmission computer (https://www.yourmechanic.com/book/?mktg_jid=417) for recorded codes and...
How do I change the Bluetooth passkey?
Your car’s Bluetooth connectivity lets you use the hands-free calling system, stream music and more. However, you’ll need to pair your device with the system first. While some phones and other devices are automatically recognized, not all are. In these...
Car only goes in reverse
Hello! The most common cause of your problem is a transmission malfunction or a pressure imbalance in the transmission. With these issues, the car is unsafe to drive until this is resolved. A qualified technician, such as one from YourMechanic,...
Explorer won't start
If the engine turns over but does not start, then you may have problems with the timing chain. The vehicle may have no start issues that need to be diagnosed (https://www.yourmechanic.com/services/car-is-not-starting-inspection) by a qualified mechanic; the timing may have jumped...
A few days after replacing serpentine belt the car will not move when in drive
This would suggest that you may have a charging system problem as well as the car potentially being in limp mode. When the car goes into limp mode this is a measure the car's computer takes in an effort to...
Oil pressure - 2000 Jeep Grand Cherokee
Hello and thanks for your question. If your oil pressure gauge is showing low pressure all the time with the engine running, then the gauge may be faulty. If your oil pressure gauge is showing low at idle and when...
Grinding/Scraping noise from the front right of the car when driving at low speeds.
If there were something in the way of foreign material (e.g., road debris) stuck, you'd probably hear the noise all the time. The noise may be due to the brake pads (particularly if they are not OEM pads). Non-OEM pads...
2010 Ford Fusion Advance trac service light on and Rack
The advancetac service light refers to the vehicles traction control system. The traction control system (https://www.yourmechanic.com/services/traction-control-light-is-on-inspection) monitors the steering and stability of the vehicle and engages when loss of traction has been detected. This is done by the use of...
Related articles
A Buyer's Guide to the 2012 Lincoln MKX
As As far as midsize SUVs go, the 2012 Lincoln MKX is one of your best options out there. Considering its price, Lincoln packed this vehicle with a ton of power and luxury. Although it bears a strong resemblance to...
Lincoln Certified Pre-Owned (CPO) Car Program
Lincoln certified pre-owned cars are under 7 years old, have less than 60,000 miles, and come with a 6 year or 100,000 miles comprehensive warranty.
How to Get Lincoln Dealership Certified
Lincoln dealerships offer automotive technician jobs to those who are Lincoln certified through UTI’s Ford Accelerated Credential Training program.
Browse other content
Maintenance
Cities