Q: I have just put my car in to Mitsubishi to have the hydraulic cylinder and slave changed I had a phone call from them today saying 2010 Mitsubishi Lancer
I have just put my car in to mitsubishi to have the hydraulic cylinder and slave changed I had a phone call from them today saying that the slave cylinder is located by the clutch so they have removed the whole clutch is this the normal process removing it all just to change that and secondly tried to charge me two and a half thousand pounds for a new clutch after he admitted there was nothing wrong with the one already on it ?
My car has 70000 miles.
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Truck cranks but won't start
Hello. If this happened right after replacing the battery terminal, then you may have a security system issue or a problem with the crank position sensor. Most of the time when you have a loss of voltage, the security system...
Nissan Altima rumble
The rumbling is caused by an imbalance problem with one of your axles or one or more of the tires. Even though you had the tires balanced, that does not mean your tires do not have a balance issue at...
Brake Lights don't work
If both of these features quit working at the same time, you may just have blown a fuse (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse). If neither one of these are related, the problem may be two separate ones. The power locks are controlled by a...
Issues with shaking in steering while driving - 1994 Ford F-150
Hey there. I would first look at tires and wheel balance, particularly if the tires have a lot of miles on them. Damaged tires (https://www.yourmechanic.com/article/how-to-check-if-your-tires-are-in-good-condition) can appear (on a balancing machine) to be balanced, yet they will vibrate terribly due...
What's the fastest/cheapest way to diagnose an ABS light?
Hello there. The ABS on most vehicles requires a scanner with ABS testing capabilities. You will need to have the system scanned and codes received and diagnosed in order to learn what is the problem. If you want to have...
Is it safe to drive around without my MAP sensor plugged in?
Hi there. From the description you have provided, your vehicle's drivability concern should be diagnosed and repaired. It is not advisable to drive your vehicle with the MAP (manifold absolute pressure) sensor disconnected. The MAP sensor's job is to determine...
Heat works okay on low fan but gets cold on higher fan speeds
The heater core fins are blocked with dirt, hair, debris from inside and outside air and will not let enough transfer of heat to the air. Core may need to be replaced. The temperature control actuator may not be moving...
Can the parking brake be adjusted ?
Hi there. If your Lexus has rear disk brakes, there are two different ways to adjust your brakes. One is to back up about 10 miles per hour and apply the parking brake. The other way is to remove the...
Nissan S15 blowing white smoke
Oil smoke is white with a bluish tint. It also has a distinctive oily smell. Burning coolant is white, and has a very sharp, acrid smell and will burn your eyes and nose. If you can warm the car up...
Related articles
A Buyer’s Guide to the 2012 Mitsubishi Galant
If If you’re in the market for a midsize sedan and want the best price possible, you may be thinking about visiting a Honda or Toyota dealership. Before you do, check out the 2012 Mitsubishi Galant. Key Features Considering how...
Symptoms of a Bad or Failing Clutch Safety Switch
If your manual car is not starting, starts while in gear, or has the Check Engine Light on, you may need to replace the clutch safety switch.
How to Replace a Fan Clutch
A fan clutch controls the car engine cooling fan and operates on temperature. It's mounted to the water pump and can cause overheating if it's broken.
Browse other content
Cities
Maintenance
Estimates