Q: I have all the parts needed for rotor and pad replacement along with brake sensors - how much to install?

The door ajar Warning Light is located on the instrument panel. This light illuminates when one of the vehicle’s doors is not properly closed. Securely close all doors, and the light will turn off.

The Best Average Fuel Economy setting is one of the driver information center (DIC) features. This setting allows you to view your most recent fuel efficiency over a selected distance, as well as the best fuel efficiency that you have...

Hi. The AC compressor runs off the serpentine belt which is driven by the engine. Therefore, turning on the AC puts a load on the engine. If there is a problem with the compressor, this may max the engine more...

Hello there. Many common faults will cause the P0126 Code with your 2008 Mazda 3. The P0126 code meaning is "Insufficient Coolant Temperature for Stable Operation." This is telling us the car is reading a coolant temperature that is below...

Hi. There are a few other reason why the AWD is not working on your suv. In a lot of cases the transfer case for the AWD stops working because either the electronic sensor or parts are bad or the...

I would certainly be concerned about the lug nuts falling off originally. However, I would not worry about the cap that had fallen off recently if the nut is still tight. Many times manufacturers will apply these chrome caps to...

The 2002 Civic model is subject to the Takata air bag recall campaign. Be sure to input the vehicle's VIN number into the NHTSA database (http://www.safercar.gov) to see if the vehicle has been recalled. If the vehicle is subject to...

Hi there. This article on what the P-0014 OBD-II trouble code (https://www.yourmechanic.com/article/p0014-obd-ii-trouble-code-camshaft-position-b-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is, what causes it and how it is resolved might shed some light on this issue. The only item that may have caused damage to this sensor would...

Hello - your symptoms suggest a failing injector (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-fuel-injector) . It appears to be leaking when it's plugged in, as well as noisy. Check for problem codes relating to a rich mixture,, although it's possible that the oxygen sensors for...