Q: I have a car with check engine light on with the code p0401... I already replaced the egr valve,egr solenoid,throttle body help ?

asked by on July 16, 2017

I have a car with check engine light on with code p0401, I already replaced the egr valve, egr solenoid, throttle body and nothing... when I accelerate it seems like it's not accelerating properly like if it's clogged up... any suggestions help ???

My car has 230000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Major brake fluid leak
Hi. It is unsafe to drive the vehicle with a major brake fluid leak. It should not be driven until a proper diagnosis of where the brake fluid is leaking (https://www.yourmechanic.com/services/brake-fluid-is-leaking-inspection) can be obtained. The vehicle may have a faulty...
2004 Chevy Express makes noise while idling
The first thing you'd want to check is the power steering (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump). A lot of times, they groan on those. If it's not the power steering, a lot of times it would be the transmission. If it's coming from the...
"No bus" code
When the No Bus message appears in your instrument cluster, its usually an indication that there is a problem with the powertrain control module or the wiring to it. This is also very likely the cause of your no start...
All of the electrical components shut down slowly while driving
Most manufacturers use a voltage regulator (part of the alternator) to keep the system voltage near 13 volts. This keeps the battery charging in almost all conditions, no matter what accessories you are running. Honda uses a device called an...
Intermediate steering shaft is rubbing frame on right turns only.
Hello, thank you for writing in. Without knowing the make and model of your vehicle is it difficult to say what the issue may be. The best method for diagnosing this rubbing is to do a full inspection of the...
Brakes
There are several places where a malfunction can cause air to enter the hydraulic brake system. Of course, air can enter through a ruptured hose or brake line, but it can also enter through a faulty master cylinder, anti-lock brake...
Would a blown coolant hose, at heater core, cause loss of power?
Yes, severe overheating will cause loss of engine power and also has a high potential to damage the engine as the pistons scuff the cylinder walls and the exhaust valves stick in the valve guides. If the overheating is severe...
My car has rough idle. When I give it gas the car won't accelerate.
At your car's age and mileage, it really could be just about anything. And since the self diagnostics on the car are not very sophisticated, it's going too take some old-school diagnostic work. If you are behind on any of...
A low grinding noise when i drive straight or skmetimes when i turn the wheel on a 2003 chevy impala
Hi Andrew. Thanks for sending in your question today. The type of noise you are describing is typically caused by a brake pad that is dragging against the rotor or wheel bearings that are worn out and need to be...

Related articles

A Buyer’s Guide to the 2012 Mitsubishi Outlander
The The smaller size and aggressive styling make the 2012 Mitsubishi Outlander a great choice for those who want an SUV, but don’t want to deal with some of the large behemoths available. With numerous tech options and all-wheel drive...
A Buyer’s Guide to the 2012 Mitsubishi Galant
If If you’re in the market for a midsize sedan and want the best price possible, you may be thinking about visiting a Honda or Toyota dealership. Before you do, check out the 2012 Mitsubishi Galant. Key Features Considering how...
How to Get Mitsubishi Dealership Certified
Mitsubishi dealerships offer automotive technician jobs to mechanics who are ASE certified or have completed the UTI Automotive Technology program.