Q: I have a 99 dodge ram 1500 4x4 with a brand new starter and battery. Its very slow to turn over and start up. Do i need a new fuel

Your car has a coat hook that you can use for hanging clothes. The hook is located on the grab handle above the left rear door. To access the coat hook, manually pull it down. The coat hook will fold...

If the engine is not turning over fast enough, the problem is either your battery or starter motor. The starter requires a lot of power to operate properly, if the battery is weak, the starter will not turn as fast...

A component has failed if the belt came off track and is now touching the fan clutch. Have an experienced technician, such as one from YourMechanic, inspect the accessories along the belt drive system for signs of wear or damage....

The only reason I can think of for this to happen is if aftermarket bulbs were used and they were not the right ones. The car should only blink fast like that when the bulb has failed to let the...

Hello there. There are many potential causes for reduced power output. The most likely would be the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), low fuel pressure, battery (https://www.yourmechanic.com/services/battery-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), or fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement). A bad throttle sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) can cause this issue...

Hi, thanks for your question. This is a common situation when what is known as the mass airflow sensor (https://www.yourmechanic.com/article/what-does-the-mass-airflow-sensor-do) needs to be upgraded, cleaned, or replaced. This is a unit that regulates air flow into the engine as it...

The P0113 (https://www.yourmechanic.com/article/diagnostic-trouble-code-dtc-p0113-by-jay-safford) code relates to a problem with the intake air temperature (IAT) sensor. The computer is seeing a reading that is outside of its normal parameters and is causing the computer to set the code. This could also...

Hello. Codes P0174 and P0453 are for the engine management and emissions systems. P0174 is the trouble code for a lean condition on engine bank 2. A lean condition occurs when the vehicle air fuel mixture is lacking in fuel,...

Hello. To answer your question, yes, this engine has two timing chains. If you have a timing code coming up then you may simply need to have the oil changed or there may be a more serious issue. If you...