Q: I have a 96 Ford ranger with cel p0340 I have recently done a timing belt, engine runs great replaced cmp sensor cel still on

asked by on June 05, 2017

I recently purchased a 1996 Ford Ranger. I replaced the timing belt and shortly after I got a check engine light p0340 camshaft position sensor. The engine seems to run great, so I replaced the camshaft position sensor. The check engine light still comes on. The check engine light doesn't come on right away, usually what it does is it will come on after I start and stop the engine a few times. Please help, is it possible the timing is off even though the engine runs smooth? Should I rry replacing the crankshaft position sensor?

My car has 12100 miles.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Headlights don’t always work, what’s the problem?
The headlights in your vehicle are high intensity display (HID) and work differently than the old-style headlight bulbs. These HID when they start to go bad will either start to dim or will blink on and off. The fix for...
How do I use the air conditioning?
Turning on the air conditioning couldn’t be easier. Simply press the A/C button, which you’ll find in the climate control cluster on the center console. A light will illuminate on the button confirming that the air conditioning has turned on....
Car idles rough when in gear
Hello. If the idle is that low, then it can be caused by a number of things. Most of the time it is caused by a vacuum leak or a dirty throttle body. The throttle body being the most common....
Car does not accelerate
These vehicles are very sensitive to someone driving with both feet, meaning if you are touching the brake at the same time pushing down the gas pedal, the computer will go into a low power/no throttle mode since it sees...
Truck jerks and hesitates on acceleration
This may be a sign of a failing mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected into the...
Following a complete car tune up with full oil change, the oil light has come on during freeway driving - no overheating and oil level okay.
The noise that you are hearing is the lifters tapping on the engine as they are not getting any oil. The best thing to do is find out what type of engine oil was put into your vehicle from when...
Hello, i had my head gasket repaired and after 8 months it has started making white smoke come from exhaust again and I can smell
Hello, thank you for writing in. With white smoke coming from the exhaust, the smell of coolant, and the (very likely although unmentioned) lowering of the coolant level, it is quite apparent that the coolant is making its way passed...
Can I drive my car through the grapevine even if I need a Cadillac converter?
Hi Koquan. It really depends on how damaged the catalytic converter is and what symptoms you are experiencing. If the engine is running sluggish, driving through the Grapevine might be risky. As you climb hills, the engine will undergo much...
My car is clunking under passenger side with acceleration. Car pulls to the right steering wheel moves like a clock ticks
These sound like the symptoms of a loose front wheel. Don't drive the car anymore until you have checked the lug nuts. (https://www.yourmechanic.com/article/how-to-tighten-lug-nuts-by-john-hege) If they are loose, and you have been driving like that for a while, there may be...

Related articles

The Best Used Cars to Buy If You Need to Haul a Motocross Bike
Of Of course you would love to be able to ride your motocross bike everywhere, but the reality is, at some point you're going to need to transport it. A cargo van of almost any make or model would be...
The Best Used Cars to Buy If You're a General Contractor
If If you're a general contractor, you probably aren’t in the market for a used car. More likely, you’re looking for a pickup truck, because you need to haul equipment and supplies to various job sites. Most contractors will likely...
Industry News for Automotive Techs: October 29 - November 4
Toyota and Getaround's smartphone key, future McLaren cars, DMCA car hacking, a fire at Ford's headquarters, and Chevrolet's SEMA 2016 show cars.