Q: I have a 2007 Toyota camry se

If the battery in your Accord is dead, you’ll need a jump to get running once more (and then you’ll probably want to get the battery replaced, or at least have the charging system checked). To jump your battery, follow...

In the interest of your safety, I would avoid driving your car. According to Chevrolet, the motor in that particular car is an interference engine. This means that, if the timing is off, the valves can make contact with the...

There are quite a few things that can cause this. Your car has variable valve timing; a complex system in which to change the cam timing. It uses oil pressure to advance or retard the timing. The oil pressure is...

Hey there. You will most likely have to have a mechanic bypass the heater coolant lines to have this resolved. Your A/C may not be controlling the air flow inside the evaporator correctly out of the vents and may be...

Hi, thanks for writing in. You will first need to scan the computer and check for any codes stored in the computer. Your computer should have codes stored if there is problems with the camshaft sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-camshaft-position-sensor) or mass air...

Hello. You will need to check the computer by scanning it to see if codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) for no start are stored in memory. Have the fuel pressure tested and ignition system tested for proper fuel to the injectors (https://www.yourmechanic.com/services/fuel-injector-replacement) and...

Hi there. Check the coolant and see if its flowing. If the coolant is not flowing, then the water pump may have stopped working. If the water pump is working, then the engine may have a blown head gasket making...

It is unfortunate that this has happened on such a new car. On the outside chance, it may just be a stuck button. If dirt or sticky liquids like soda or coffee ever got behind it, that could be making...

Hello, Unfortunately, without additional information as to the make, model and year of your motorcycle it may not be possible to suggest what may be causing it to stall. Depending on whether or not it is fuel injected, or not...