Q: i dont know if the problems with my (battery) could affect the gas pedal. But it HAS BEEN CLEANED.

asked by on

SOME PEOPLE SAY I MAY HAVE MSITAKENLY PLACE THE CAR ON NEUTRAL THAT IS WHY IT ROLLED BACK.

My car has 15767 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. i dont know if the problems with my (battery) could affect the gas pedal. But it HAS BEEN CLEANED.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Overheating and hissing

Depending on the outside temperature and accessories that you are running your engine will get up to 190 to 205 degrees when it is running normally. The gauge is a estimate of the actual temperature of the engine. As long...

Q: Fuel regulator replaced now showing p0172 and p0170 codes to replace fuel regulator

The codes P0171 and Po172 can be caused by other sensors like the MAP sensor, BARO sensor or ECT ACT sensors and each sensor will need to be checked to see if one is out of specifications.

Q: High pitch squeal/ loss of power, louder squeal w/o muffler. Not the cat

Hi there. We typically focus only on OEM applications and repair tips on this website. You might want to consult with a GM performance specialist or contact the cam manufacturer to ensure you followed the correct installation and break in...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.