Q: i can't get the intake manifold off. something is connected in back ?

asked by on June 22, 2017

i need to remove intake manifold ,after removing all hoses and bolts it won't come off. there must be a hidden something i don't see!!!

My car has 200000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Which Sensors Can Be Cleaned Instead of Being Replaced?
In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many types...
Power window stuck
If the other windows work, then the fuse is not the issue. The power to the window motor on the affected window needs to be checked when the switch is being operated, in order to determine whether the switch, or...
Car is making a grinding/clanking sound
Hello. It sounds like you had a total transmission failure. When you have a severe internal breakage, like a sun shell or clutch pack, this will occur. The transmission will need to be disassembled and rebuilt in order to fix...
Car doesn't have the acceleration "punch" it once had
The Insight has something called the Lean Burn mode, which is part of the cleaner emissions scheme. It has always been there, but over time, it seems to get more amplified as owners do not get the expected kick that...
While highway driving, rear tire blew out
The rubber tires on any vehicle can experience a blowout under a number of conditions. If the tire is low on air pressure, the added grip causes more friction, heat, and wear. If a tire has an unseen injury, a...
Why is my steering hard at idle after replacing powersteering pump and rack
Anytime a system is contaminated with metal from a failed part, you will get filters that get clogged. Since you installed a return line filter, this will help filter out any contamination but may also starve the pump of fluid....
Immobilizer ring was damaged. Can I bypass the device?
Hi there. If the vehicle has a security system, you will need to replace it with the manufacture security system (providing the thief had destroyed the OEM part). If the thief had destroyed an aftermarket security system, then you can...
I replaced my camshaft and crankshaft sensor for my 2009 Saturn Outlook. I'm still seeing p0017 code. What could be the problem?
Diagnostic Trouble Code P0017 (https://www.yourmechanic.com/article/p0079-obd-ii-trouble-code-crankshaft-position-camshaft-position-correlation-bank-1-sensor-b-by-jay-safford) has many causes other than a failed position sensor. For example, the valve timing could be off if the timing chain has jumped, there could be oil flow problems to the phaser from incorrect oil...

Related articles

Symptoms of a Bad or Failing Ignition Ignitor
Common signs include engine misfires, the Check Engine Light coming on, car not starting, and a decrease in power, acceleration, and fuel efficiency.
Mercury Certified Pre-Owned (CPO) Car Program
Drivers Drivers who are shopping around for a used Mercury vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to...
Understanding the Mercury Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercury Intelligent Oil Life Monitor indicates when and what service your car needs.