Q: How to replace the carbon brush and bushes in startor motor

asked by on March 09, 2017

to change the carbun brush and bushes in startor motor

My car has a manual transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car clicks when starting
If there is a click when you try starting it then you need to see where the click is coming from. I typically start by checking to see if the clicking is coming from the starter. If the starter is...
Car vibrating
If the brakes are vibrating when stopping, then the rotors are warped out and the bearings are bad. If you also have a vibration during acceleration you may be having a transmission or mount issue. You may have one or...
AC works well briefly, then blows warm
Hello there. A few different things can cause the AC to shut off after a short while. The first being an overfilled AC refrigerant. When this occurs, the pressure in the system rises too high and causes the AC to...
What would cause the clutch on an ac compressor to continue to go bad after being replaced three times?
The compressor clutch relay on these vehicles are a known cause of sticking on the compressor clutch and overheating the A/C compressor clutch coil. Replace the A/C relay (https://www.yourmechanic.com/services/ac-compressor-relay-replacement) to see if it cures the clutch going bad the next...
How to get rid of brakes noise when braking?
Hello! The material used in the brake pads can cause the brakes to be noisy when applying the brakes and sound like grinding metal-to-metal at times. This grinding may be more or less depending on the quality of metallic brake...
Thrust angle alignment
A thrust angle alignment, which I will explain momentarily, is a mundane, routine alignment procedure which is in fact performed every time a vehicle has a 4 wheel alignment. A quick digression though: I am surprised to hear that it...
I have a 1990 Jeep Cherokee with some weird stalling issues.
Hi there. Seems that the troubleshooting is leading to the transmission. When the vehicle goes into drive or reverse, if the transmission is lock up or the converter clutch is active, the engine will stall. When tapping on or turning...
Ignition
Hi there. Unfortunately, we're not able to post images in the Q & A; which is why purchasing a service and repair manual for your Honda Odyssey would be very helpful in explaining how the ignition system works and is...
My abs and traction lights on and wont shift into gears
It is possible that your transmission can be malfunctioning. I would recommend having your transmission inspected by a qualified transmission specialist to determine the exact cause of this issue. If your transmission is stuck in the lower gears, this can...

Related articles

5 Essential Things to Know About Remote Starters
Remote Remote starters are great for those frigid mornings when you want to slide into a nice and toasty vehicle for the drive to work. However, before you rush out and purchase one, there are a few things you need...
Symptoms of a Bad or Failing Cold Start Injector
Common signs include hard starting, a decrease in fuel efficiency, and engine performance issues.
Symptoms of a Bad or Failing Distributor Rotor and Cap
Common signs include engine misfires, car not starting, the Check Engine Light coming on, and excessive or unusual engine noises.