Q: How to change the high pressure hose on Cadillac Deville DHS 2001?

asked by on

My high pressure hose on my Cadillac Deville DHS has a leak and I want to know how do I replace it?

My car has 191000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How to change the high pressure hose on Cadillac Deville DHS 2001?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Alternator not charging

The alternator charging rate is controlled by the engine control module under the air cleaner housing. You should disconnect the battery and check the connections at the engine control module and look at pin 54 on connector one (C1). It...

Q: My anti theft system is activated and my car won't start. I didn't know there was even an alarm on the car. I've tried everything

Your anti-theft system (pass-lock) may have a fault or it may be the key itself. The keys have a chip embedded in them. When inserted into the ignition, the alarm system looks for codes from the key. Try another key...

Q: Do I have a damaged head gasket?

Hi there. This can be a bad head gasket or it may be something much smaller. If the coolant temperature gauge is staying in the normal range then it may just have a leak in the system. If there is...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...