Q: how to change 4 shock absorbers ?

The shifter in your vehicle has six positions: P, R, N, D, 2, and 1. When the shifter is set to any of these positions, the corresponding light will illuminate. Here’s what each position means: 1. P is Park. When...

Hi there. If the steering wheel shakes when hitting the brakes, then you are right, it does have warped rotors. If the rotors on this large of a vehicle are that warped then the rotors should be replaced (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) to...

Yes, that is what they are for. A lot of German cars have them. They are made so that you can jack them up (https://www.yourmechanic.com/article/all-about-car-jacks-and-stands) at these safe points and not worry about anything bending or slipping. That's where you'll...

With this kind of engine issue, I would imagine that your Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on, indicating that the built in diagnostics have logged and error and a diagnostic trouble code. It will be important to know these codes...

Hello. From what you've described it would appear that your vehicle may have suffered serious transmission issues. Slipping and grinding sounds are commonly associated with internal transmission issues. It may be possible that the torque converter or transmission gears have...

I don't believe you can sell the car without the title. You may be able to get assistance from a special power of attorney for the buyer in order to sign the title for you once they receive it. If...

You do not need to remove the throttle body. Once you remove the air cleaner and air inlet tube to the throttle body then drain coolant. Remove hose from thermostat outlet pipe. Remove the exhaust crossover pipe and then you...

Drain the coolant a little to lower coolant level below thermostat housing. Remove throttle inlet tube for access to thermostat housing under throttle body. Remove upper hose and heater hoses from housing. Remove housing bolts and replace thermostat. Reinstall components...

Anytime the code reader says sensor 1, it is referring to the upstream. Anytime the code reader says sensor 2, it is referring to the downstream. If you need further assistance with your oxygen sensors (https://www.yourmechanic.com/services/oxygen-sensor-replacement), then seek out a...